{
 "currentVersion": 10.71,
 "id": 356,
 "name": "Flood Inundation by Large Storm 2030 Medium with coastal armoring",
 "type": "Feature Layer",
 "description": "These hazard zones depict flooding caused by a coastal storm. The processes considered include (1) storm surge (a rise in the ocean water level caused by waves and pressure changes during a storm), (2) wave run-up (waves running up the beach and over coastal property, calculated using the maximum historical wave conditions), (3) extreme lagoon water levels which can occur when lagoon mouths are closed and fill up during rainfall events, and (4) additional flooding caused by rising sea level in the future. These hazard zones do NOT consider upland fluvial (river) flooding and local rain/run-off drainage, which likely play a large part in coastal flooding, especially around coastal confluences where the creeks meet the ocean. There are two types of inundation areas: (1) areas that are clearly connected over the existing digital elevation through low topography, (2) and other low-lying areas that don\u2019t have an apparent connection, as indicated by the digital elevation model, but are low-lying and flood prone from groundwater levels and any connections (culverts, underpasses) that are not captured by the digital elevation model. This difference is captured in the \u201cConnection\u201d attribute (either \u201cconnected\u201d or \u201cconnectivity uncertain\u201d) in each dataset. We recommend these be mapped as separate colors. -------------------------------This feature is one in a series of coastal flood and erosion hazard zones developed as part of the Santa Barbara County Coastal Hazard Modeling and Vulnerability Assessment. For detailed documentation about how these hazard zones were developed, please see \"Santa Barbara County Coastal Hazard Modeling and Vulnerability Assessment: Technical Methods Report,\" a report prepared by ESA for The County of Santa Barbara in June 2015, as well as \u201cSanta Barbara County Coastal Resiliency Phase 2 Coastal Hazard Modeling: Technical Methods Memorandum,\u201d a report prepared by ESA for the County of Santa Barbara in July 2016.-------------------------------The name of this shapefile reflects the future scenarios and planning horizon that the hazard zone represents, as follows:\"coastal_floodhz\" + _ + sea level rise scenario + planning horizon-------------------------------Sea level rise scenarios:ec \u2013 Existing conditions (2010 water level)s1 \u2013 Low sea level rise (27 cm by 2100)s2 \u2013 Medium sea level rise (78 cm by 2100)s3 \u2013 High sea level rise (153 cm by 2100)-------------------------------Planning horizons:2010 (Existing conditions)203020602100",
 "geometryType": "esriGeometryPolygon",
 "sourceSpatialReference": {
  "wkid": 102100,
  "latestWkid": 3857
 },
 "copyrightText": "Environmental Science Associates (ESA), 2016",
 "parentLayer": {
  "id": 348,
  "name": "Armoring"
 },
 "subLayers": [],
 "minScale": 0,
 "maxScale": 0,
 "drawingInfo": {
  "renderer": {
   "type": "uniqueValue",
   "field1": "Connection",
   "field2": null,
   "field3": null,
   "defaultSymbol": null,
   "defaultLabel": null,
   "uniqueValueInfos": [
    {
     "symbol": {
      "type": "esriSFS",
      "style": "esriSFSSolid",
      "color": [
       59,
       115,
       153,
       255
      ],
      "outline": {
       "type": "esriSLS",
       "style": "esriSLSSolid",
       "color": [
        40,
        77,
        102,
        255
       ],
       "width": 1
      }
     },
     "value": "Connected",
     "label": "Connected to ocean over topography",
     "description": ""
    },
    {
     "symbol": {
      "type": "esriSFS",
      "style": "esriSFSSolid",
      "color": [
       215,
       158,
       158,
       255
      ],
      "outline": {
       "type": "esriSLS",
       "style": "esriSLSSolid",
       "color": [
        153,
        112,
        112,
        255
       ],
       "width": 1
      }
     },
     "value": "connection uncertain",
     "label": "Connectivity uncertain",
     "description": ""
    }
   ],
   "fieldDelimiter": ","
  },
  "transparency": 0,
  "labelingInfo": null
 },
 "defaultVisibility": false,
 "extent": {
  "xmin": -1.34331669351E7,
  "ymin": 4078932.0414000005,
  "xmax": -1.32994624822E7,
  "ymax": 4161270.4442000017,
  "spatialReference": {
   "wkid": 102100,
   "latestWkid": 3857
  }
 },
 "hasAttachments": false,
 "htmlPopupType": "esriServerHTMLPopupTypeAsHTMLText",
 "displayField": "Connection",
 "typeIdField": null,
 "subtypeFieldName": null,
 "subtypeField": null,
 "defaultSubtypeCode": null,
 "fields": [
  {
   "name": "OBJECTID",
   "type": "esriFieldTypeOID",
   "alias": "OBJECTID",
   "domain": null
  },
  {
   "name": "Shape",
   "type": "esriFieldTypeGeometry",
   "alias": "Shape",
   "domain": null
  },
  {
   "name": "Id",
   "type": "esriFieldTypeInteger",
   "alias": "Id",
   "domain": null
  },
  {
   "name": "EL_mNAVD",
   "type": "esriFieldTypeDouble",
   "alias": "EL_mNAVD",
   "domain": null
  },
  {
   "name": "Connection",
   "type": "esriFieldTypeString",
   "alias": "Connection",
   "length": 50,
   "domain": null
  },
  {
   "name": "Shape_Length",
   "type": "esriFieldTypeDouble",
   "alias": "Shape_Length",
   "domain": null
  },
  {
   "name": "Shape_Area",
   "type": "esriFieldTypeDouble",
   "alias": "Shape_Area",
   "domain": null
  }
 ],
 "geometryField": {
  "name": "Shape",
  "type": "esriFieldTypeGeometry",
  "alias": "Shape"
 },
 "indexes": [
  {
   "name": "FDO_OBJECTID",
   "fields": "OBJECTID",
   "isAscending": true,
   "isUnique": true,
   "description": ""
  },
  {
   "name": "FDO_Shape",
   "fields": "Shape",
   "isAscending": true,
   "isUnique": false,
   "description": ""
  }
 ],
 "subtypes": [],
 "relationships": [],
 "canModifyLayer": true,
 "canScaleSymbols": false,
 "hasLabels": false,
 "capabilities": "Map,Query,Data",
 "maxRecordCount": 100000,
 "supportsStatistics": true,
 "supportsAdvancedQueries": true,
 "hasZ": true,
 "hasM": true,
 "supportedQueryFormats": "JSON, geoJSON",
 "isDataVersioned": false,
 "ownershipBasedAccessControlForFeatures": {"allowOthersToQuery": true},
 "useStandardizedQueries": true,
 "advancedQueryCapabilities": {
  "useStandardizedQueries": true,
  "supportsStatistics": true,
  "supportsHavingClause": true,
  "supportsCountDistinct": true,
  "supportsOrderBy": true,
  "supportsDistinct": true,
  "supportsPagination": true,
  "supportsTrueCurve": true,
  "supportsReturningQueryExtent": true,
  "supportsQueryWithDistance": true,
  "supportsSqlExpression": true
 },
 "supportsDatumTransformation": true,
 "supportsCoordinatesQuantization": true
}